All electric injection molding machine

Advantages of all-electric injection molding machine:

1, energy saving

Because the servo motor is driven directly according to the requirements of the force required by the actuator, it not only improves the efficiency, but also improves the energy utilization rate. The energy utilization rate can reach more than 95%, so it saves 25%-60% energy than the full hydraulic injection molding machine.

2. Stable injection performance

Hydraulic injection molding machine of various dynamic parameters affected by hydraulic oil temperature change and easy hair swings, compared with all-electric all dynamic technical parameters of the vertical injection molding machine basically do not have the interference of external factors, the molding parameters of computer storage is always in line with the actual processing conditions, so the injection performance is stable, fast response, precise injection molding parameters can only be truly reflected on the servo motor system.

3, high efficiency

The application of servo motor improves the reactivity of the system. To a series of fully electric injection molding machine as an example, its forming time is only 1/3 of the fully hydraulic injection molding machine, because electric injection molding machine of each actuator has independent servo motor drive, and not affected by system, so it can be composite action, for example, can be out at the same time, in the process of open mould clamping in plasticizing process at the same time, thus greatly improving the productivity.

4, water saving

Because the all-electric injection molding machine does not use hydraulic oil, only in the feeding port needs cooling water, so compared with the load sensitive pump hydraulic injection molding machine, the use of cooling water can be reduced by 70%, compared with the ordinary quantitative pump hydraulic injection molding machine, cooling water can be reduced by 90%.

5. Optimize the working environment

Because does not use the hydraulic oil, can keep the working environment clean, the noise of the machine is more than 10dB lower than the full hydraulic injection molding machine, in the optimization of the working environment at the same time, because of the cancellation of the hydraulic system, so that the injection molding machine accounted for 15% of the area saved.

6. Save energy

Because each action of the all-electric single-slide injection molding machine is controlled by the corresponding servo motor, when a production action is carried out, other control motors do not need to run, so the power consumption is greatly saved.