Contact: Mr. Sun
Telephone: 0574-55846306/0574-55846307
Phone: +86 18868918868
Email address: sunquan198@163.com
Fax: 0574-55846308
Add: No.198 Qianjiao Road, Lingnan Industrial Zone, Beilun, Ningbo, China
Website: http://www.nbptjx.com
Alibaba website: shop1450529086289.1688.com
. In the complex equipment and processing plant manufacturing, fully automated vertical injection molding machine equipment is very important. Therefore, considering multiple problems in the engineering project organization equipment, we can complete the efficient use, and then make the production and manufacturing operation more quickly
First of all, we understand the vertical injection molding machine, which is generally divided into semi-automatic and automatic operation.
Manual operation is carried out in one production cycle, and each action is realized by the operator switching the operation button switch. Generally, the machine is selected during the test and adjustment of the mold. During semi-automatic operation, the machine can automatically complete the action of a working cycle, but after each production cycle, the operator must open the safety door, remove the workpiece, and then close the safety door, so that the machine can continue the production of the next cycle.
Fully automatic vertical injection molding machine set up automatic operation in the completion of a working cycle of action, can automatically enter the next working cycle. In the normal continuous working process without shutdown for control and adjustment. However, it must be noted that if automatic work is required, (1) do not open the safety door in the middle of the process, otherwise the automatic operation will be interrupted; (2) timely feeding; (3) if the use of electric eye induction, should pay attention not to cover the electric eye.
Normal production, generally choose semi-automatic or automatic operation. At the beginning of the operation, the operation mode (manual, semi-automatic or fully automatic) should be selected according to the production needs, and the corresponding switch manual, semi-automatic or fully automatic.
When each action in a cycle is not adjusted properly, manual operation should be selected first, and semi-automatic or fully automatic operation should be selected after confirming that each action is normal.
Therefore, the operation of the fully automated vertical injection molding machine should set the output point of the computer parameters in advance, and the production is faster!"