Contact: Mr. Sun
Telephone: 0574-55846306/0574-55846307
Phone: +86 18868918868
Email address: sunquan198@163.com
Fax: 0574-55846308
Add: No.198 Qianjiao Road, Lingnan Industrial Zone, Beilun, Ningbo, China
Website: http://www.nbptjx.com
Alibaba website: shop1450529086289.1688.com
For the purchase of vertical injection molding machine, we should pay attention to what problems, the following by my summary divided into the following aspects:
1. Collect specifications of materials and components used in vertical injection molding machine, specifications and models of injection products to be manufactured and plastic particles, and indicate specifications of injection mold
2. Because the precision vertical injection molding machine manufacturers must lock the mold: check the height of parts, wall thickness, raw materials, core and projection surface, in order to determine the required clamping force
3. Verify the indoor space of the selected clamping equipment: Verify the specification of the abrasive tools: level, vertical and closing height match the correlation of the selected clamping equipment: increase the clamping mold selection when necessary
4. Plastic machine cycle: according to the wall thickness, steps, the thickness of the glue inlet, rib and boss, make the decision about filling, filling and cooling time, according to the height of the parts (mold locking travel arrangement), the core, the rotary vine pump posture and all the essential parts of the discharge, make the decision about the mold locking transverse movement time and the parts of the discharge. This will help to determine the operating specifications of the equipment required.
5. Plastic machine mold locking rate and dry cycle time pick up: determine whether the machine mold locking performance can reach the required performance in work. If greater work performance is essential, the decision of a faster traverse rate is not shared and/or desirable. Check the selection of lifting clamping rate and make pick - up decision.
6. Plastic machine injection module selection: to decide a unit with sufficient capacity, can accept the injection amount introduced. The general selection is required to inject between 10 % to 80 % of the total volume.
7 measurement of vertical injection molding machine production: output net weight per hour, injection molding processing a monument if how much time these!