Contact: Mr. Sun
Telephone: 0574-55846306/0574-55846307
Phone: +86 18868918868
Email address: sunquan198@163.com
Fax: 0574-55846308
Add: No.198 Qianjiao Road, Lingnan Industrial Zone, Beilun, Ningbo, China
Website: http://www.nbptjx.com
Alibaba website: shop1450529086289.1688.com
Before operating the reverse injection molding machine, it is necessary to master its operation process to ensure the efficiency and quality of the machine. But what should we pay attention to when we operate this machine?
First of all, before operating a vertical injection molding machine, you need to do a good job of preparation. Our staff should see if the electrical control box and its components are in good order. Also check the oil level of the hydraulic oil itself. If the oil storage is not enough, it will affect the work of the machine to some extent. If the oil production is abnormal, it should be adjusted in time. The final step in the preparation process is to connect the cooling water valve to the cooling water.
Secondly, when the workers operate the vertical injection molding machine, they must remember to push the mechanism to the position, put down the fixed template, and the fixed template and the upper mold screw need to be tightened to maintain its stability. For the movement of the die structure, during this process, it is necessary to observe whether its position is correct. This is correct. After the loading process is complete, the barrel needs to be heated. You need to turn on the electric switch of the control box and then add some plastic into the bucket so that the plastic can be completely heated and melted.
In the operation of injection molding, attention should be paid to ensure the closed state between the vertical injection mold and the moving mold. After completion of the injection operation, the injection plunger still needs to be drawn out, and then the 8 solenoid valves are connected to lower the mechanism and open the demoulding mode. Correct work flow is very important in operation, but we should also pay attention to correct maintenance and maintenance.